Outside wall sections TYPED
Break the house into rectangles. Length × width per section, in feet.
| Section | Length | Width | Area |
|---|---|---|---|
| A · Main house | ft | ft | 1,176 sq ft |
| B · Back bump-out | ft | ft | 120 sq ft |
| Garage (on slab) | excluded, not over crawl | — | |
| Footprint (sample) | Perimeter 160 ft | 1,296 sq ft | |
Compare with county records Optional
A cross-check only. Pick which number the estimate uses.
Main-floor scan Later
Not in version 1. Android tablets like the Galaxy Tab have no depth (LiDAR) sensor, so a camera room scan is rough at best. Later it could import a floor plan made in a separate scanning app. A crawlspace can't be scanned at all (low clearance, no line of sight).
No scan on this jobCrawlspace measurementsSAMPLE
Tap a box, then press the button on the laser. Or just type it.
| Measurement | Value | Source |
|---|---|---|
| Crawl section 1 · length | ft | LASER |
| Crawl section 1 · width | ft | LASER |
| Crawl section 2 · length × width | × ft | TYPED |
| Foundation wall height (avg) | ft | LASER |
| Lowest clearance (dirt to joist) | in | TYPED |
| Vents | ea | TYPED |
| Access door (w × h) | × in | TYPED |
| Calculated: floor 1,223 sq ft · wall run 157 ft · wall area 440 sq ft | ||
Bluetooth laser Version 1
Why not scan the crawl?
Camera and depth scanning need room to stand back and a clear line of sight. A crawlspace is 1–3 ft tall and full of piers and ducts, so it is measured by laser or tape.
Moisture readings SAMPLE
| # | Where | What | Reading |
|---|---|---|---|
| 1 | NW corner joist | Wood MC | 22 % |
| 2 | Center subfloor | Wood MC | 19 % |
| 3 | East sill plate | Wood MC | 27 % |
| 4 | Crawl air | Rel. humidity | 78 % RH |
Photos & notes
Tap-in findings
Tap Shown / Hidden to choose what the customer sees. Hidden lines still count in the total; they just are not listed on the customer's screen.
Your crawlspace options, Pat
100 Sample Ridge Rd · prepared on site by Keith · sample data
Sketch pad S Pen or fingerSAMPLE
Draw the crawl layout, piers, water spots, the access door. Pressing harder with the S Pen draws a thicker line. Once the pen is used, resting your palm won't draw.
Job notes
Saves with the job
- Typed and spoken notes save on this lead's job
- The sketch saves as a picture next to the job photos
- Office sees them with the draft quote
- Not sent to the customer
Save as a draft quote
Saves into this lead's Quotes as a draft. Nothing goes to the customer from here.
- Customer
- Pat Example (sample)
- Footprint
- 1,296 sq ft · tape
- Crawlspace
- 1,223 sq ft floor · 440 sq ft wall
- Findings
- 4 moisture points · 14 piers · barrier torn · radon 5.2 (sample)
- Options
- Good / Better / Best · prices blank
- Photos
- 3 attached
- Notes & sketch
- typed / voice notes + 1 sketch
What happens on save
- Quote record created with status Draft
- Measurements, findings, photos, notes and sketch attached to the lead
- Hidden / shown choice saved per line
- Office sees it in Quotes to review prices
- No text or email to the customer
- No e-signature request
Per-unit rates
Rate per unit, which options include it, and whether the customer sees the line.
| Line item | Unit | Rate | In | Customer |
|---|
Minimum truck roll
"50% more" multipliers
What gets marked up, when, and by how much. Keith and Eamon described a "50% more" rule; what it applies to is still open.
| When | Multiplier | Applies to |
|---|---|---|
| Clearance under in | ||
| Standing water / mud | ||
| Heavy debris | ||
Moisture color bands
Not part of this mockup
Only Quotes → Estimator and Settings → Pricing rules are mocked here.